Fire Extinguisher
Available in DCP, CO2, Water, and Foam variants for Class A, B, C, and E fires. Capacities from 1 kg portable to 50 kg trolley-mounted units. Annual refilling and maintenance support included.
Capacity Range
1 kg – 50 kg
Operating Pressure
10–15 bar (DCP)
Discharge Time
8–30 seconds
Fire Extinguisher
IS:2878 / IS:15683
Working Principle
How It Works
When the safety pin is pulled and the squeeze lever is pressed, a pressurised extinguishing agent discharges through the nozzle. The agent — DCP powder, CO₂ gas, foam, or water mist — smothers, cools, or chemically interrupts the fire's combustion triangle of fuel, heat, and oxygen. Remember the PASS technique: Pull the pin, Aim at the base of the fire, Squeeze the lever, and Sweep side to side.
Product Range
Available Types & Variants
What You Get
Key Features
Use Cases
Where It's Used
At a Glance
Technical Specifications
Capacity Range
1 kg – 50 kg
Operating Pressure
10–15 bar (DCP)
Discharge Time
8–30 seconds
Effective Range
2–6 metres
Keep It Ready
Maintenance & AMC Tips
Annual refilling and pressure check as per IS:2190
Check pressure gauge needle monthly — must be in the green zone
Confirm safety pin is intact and tamper seal is unbroken
Hydraulic pressure test required every 3 years
Replace or refill immediately after any partial discharge
Legal & Compliance Requirement
The National Building Code 2016, IS:2190, and all Indian state fire rules mandate fire extinguishers in every commercial, educational, and industrial premises. Their presence is a primary condition for fire NOC clearance, building occupation certificates, and factory licences. Insurance companies also require proof of installation and annual maintenance records.
Get Fire Extinguisher for Your Premises
Contact our fire safety engineers for a free site visit, product demonstration, and customised quote — no obligation.
Keep Exploring